trs cable for expression pedal TRS to Dual Mono Cable Designer

trs cable for expression pedal TRS to Dual Mono Cable DesignerIf you use a True Bypass Looper that needs Insert Cables for its stereo loops, or you want to use your volume pedal as an expression pedal, or access your pedals built in FX Loop These TRS to Dual Mono Cables are for you! TRS to Dual Mono cables are also known as Y Cables, Breakout Cables or Insert Cables and can be used for a variety of applications. If you have an RJM Mastermind PBC then you'll know that the stereo loops only have two jacks (instead

If you use a True Bypass Looper that needs Insert Cables for its stereo loops, or you want to use your volume pedal as an expression pedal, or access your pedals built in FX Loop - These TRS to Dual Mono Cables are for you! 

TRS to Dual Mono cables are also known as Y Cables,  Breakout Cables or Insert Cables and can be used for a variety of applications.

If you have an RJM Mastermind PBC then you'll know that the stereo loops only have two jacks (instead of the typical 4) per loop to save space.  These jacks are TRS which means tip and ring are carrying the left and right signal, and sleeve is ground.  These Audio Insert Cables are just what you need.

Plug Types

TS and TRS Pancake - These are a low profile right angle jack that allow pedals to be placed close to each other and will generally suit most applications on your board. However, don't use TRS pancakes for Insert Cables on True Bypass units. They tend to be a bit too big

TS and TRS Right Angle - These are needed when a pedal has jacks close together, like the Boss DD-7. The TRS Right Angle will work on an RJM PBC10 (bottom row will need to be angled down, top row angled up), they are too long to work on a PBC 6x without a slight riser under the 6x to give more clearance.

TS and TRS Short-Body Straight - The most common application for these is a true bypass looper where right angle jacks cannot be used.  Since these jacks do not have strain relief, they are best suited for pedalboard and rack applications. 

TS and TRS ESP - These are the smallest soldered plugs available on the market today.  Made with the best materials, smallest form factor, this plug will fit anywhere on your pedalboard! Stereo boss pedals (notoriously close together), GigRig G3 switchers, TC electronic stereo pedals, RJM PBC 6X switcher - all of these will now work with the ESP Plug!

Which is left and which is right?

The Goodwood Audio standard - tip is left and ring is right.  One of the cables has a stripe.  This cable will always be soldered to the ring of the TRS jack.

If you plan to use a mono effect in one of the stereo loops of the PBC you will need TRS (floating ring) to TS and TRS (tip & ring joined) to TS cables.  Please email us before placing your order so we can confirm what you require.

Another common use for Y cables is to insert effects into another pedal's effects loop.  Once again, to save space it is usual to find a TRS jack as the insert point. 

Which is send and which is return?

Our standard is that tip is send and ring is return.  One of the cables has a stripe. This cable will always be soldered to the ring of the TRS jack.  Please note that our standard might not be the same as your pedal.  Please consult with it's manufacturer to find out which is send and which is return on you pedal.

All TRS to dual mono cables use Mogami W2528 with plugs sourced from a variety of different manufacturers to get you the best options available on the market today!

TRS stands for tip ring sleeve.  Tip and ring will carry either left and right, or, send and return information.  Sleeve is the common ground.

Dual mono can also be called Dual TS or DM.  TS stands for tip sleeve, which is a standard instrument or patch cable.